Moisture Resistance and Environmental Adaptability of Assembled Indoor Sports Wood Flooring

Assembled indoor sports wood flooring has far better moisture resistance and environmental adaptability than traditional solid wood sports flooring, effectively solving the common problems of wood deformation and warping that plague traditional wood flooring. Each modular unit is subjected to a strict constant temperature and humidity treatment process before leaving the factory, which stabilizes the internal moisture content of the wood at a level consistent with the average humidity of most indoor environments, greatly reducing the internal stress inside the wood. The edges of each wood panel are coated with a special moisture-proof sealant, which can prevent moisture in the air from invading the interior of the wood from the side of the splicing gap. The bottom of the entire modular unit is equipped with a fully enclosed moisture-proof isolation layer, which completely isolates the wood layer from the ground, preventing the wood from absorbing moisture and deforming even if the ground accidentally accumulates a small amount of water. This environmental adaptability allows the assembled sports wood flooring to be normally used in indoor spaces with large humidity fluctuations, such as multi-functional halls in southern humid areas and temporary sports venues near swimming pools. Even in an environment with a relative humidity of 30% to 70%, the flooring system will not experience obvious warping, arching or cracking, and the tightness of the splicing structure can always be maintained.