Refinishing Basics for Aging Indoor Basketball Court Wood Flooring

After several years of heavy use, even the most well cared for indoor basketball court wood flooring will start to show signs of wear, with scuffed marks, faded paint lines, and small scratches across the playing surface. Many facility owners mistakenly think this means they need to replace the entire floor, but in almost all cases, a professional refinishing process can restore the surface to like new condition at a small fraction of the cost. The first step in refinishing is to use progressive grades of sanding equipment to remove the old worn finish, the top layer of old paint lines, and all the surface scratches that have built up over the years. This process carefully removes only a tiny, thin layer of the wood itself, so the planks remain thick and strong enough to be refinished multiple times over their lifespan. Once the sanding is complete, the raw wood surface is cleaned thoroughly to remove all dust, and a new base coat of finish is applied to seal the grain and protect the wood from moisture. After the base coat cures, new official basketball court lines are painted on with precision, following the exact measurements of the court, before a final top coat of non slip finish is added to create a smooth, consistent playing surface. A properly done refinish job not only makes the indoor basketball court wood flooring look brand new, it restores all the original performance properties, bringing back the exact shock absorption and ball bounce that the floor had when it was first installed.