Installation Process Standards That Make Naibu Indoor Basketball Court Wooden Flooring Long-Lasting

A high-quality sports floor product must be matched with a professional and standardized installation process to give full play to its due performance advantages. Naibu indoor basketball court wooden flooring has a complete set of exclusive installation process standards that have been verified by thousands of projects, which can ensure that the floor can maintain a long-term stable and excellent state after leaving the factory and being delivered to the venue. Many venue operators have had such experiences: they bought high-quality floor materials, but after a period of use, problems such as uneven floors, local bulges and uncoordinated shock absorption effects appeared, which are often caused by non-standard installation. Naibu indoor basketball court wooden flooring completely avoids these problems through a whole-process standardized installation system. Before the official installation, the professional construction team of Naibu will first carry out a detailed inspection and treatment of the original ground of the venue. They will test the flatness, moisture content and hardness of the ground one by one, and carry out self-leveling treatment for the ground that does not meet the standards, and lay a professional moisture-proof isolation layer. This step is the foundation to prevent the floor from being affected by the moisture on the ground and causing deformation, and it is also the first key process to ensure the long-term use of Naibu indoor basketball court wooden flooring. In the keel installation link, the team will first measure the level of the entire venue with a high-precision laser level, and adjust the height of each keel support one by one, so that the level error of the entire keel structure does not exceed 2mm. The spacing between the keels is strictly set according to the sports load standard, and the connection between the keels and the ground adopts a fixed process that will not loosen for a long time, which ensures that the entire keel buffer system can uniformly bear the impact from any position on the court. When laying the surface layer of Naibu indoor basketball court wooden flooring, the construction team will arrange the direction of the wood grain according to the lighting and use habits of the venue, and reserve a reasonable telescopic gap around the venue according to the local seasonal humidity change range. The nailing process for fixing the surface board adopts a professional sports floor special nail gun, which penetrates into the keel at a fixed angle, which not only ensures the firm fixation, but also avoids the damage to the internal structure of the board. After the surface board is laid, the construction team will carry out three times of fine sanding from coarse to fine, so that the entire floor surface is completely smooth and seamless, and then apply the sealant and finish strictly according to the process requirements. The entire installation process of Naibu indoor basketball court wooden flooring has clear acceptance standards at every step, and only after passing the inspection can the next process be carried out, which ultimately delivers a perfect sports floor that is stable, flat and durable for the venue.